Welcome to Dongguan Dean Testing Co., Ltd.  Hotline: 0769-81666160(Headquarters) 0769-88087383(Testing Department)

Basic Introduction

The MIC department in Vietnam announced in early 2016 that starting from October 1st of this year, all lithium batteries, including those sold independently and used in end products such as laptops, tablets, and mobile phones, will require a DOC certificate (standard number: QCVN 101:2006/BTTTT). The above products will also be required to provide the DoC of the battery when undergoing MIC certification in Vietnam.

On July 4, 2016, the MIC department considered that the product testing and certification cycle was too long, and battery manufacturers did not have enough time to meet certification requirements. Therefore, they issued another notice to postpone the mandatory certification date for battery products until April 1, 2017.

The following is a notice from MIC Vietnam to postpone the mandatory certification of battery products:

The Ministry of Information and Communications of the Socialist Republic of Vietnam (MIC) implements mandatory TCVN/TCN standard specifications for electromagnetic interference and communication products related to information products. The electromagnetic interference part can be applied for by local suppliers through self declaration, and finally approved by the Ministry of Information, and the product can be sold in the Vietnamese market.

The IEC testing standards corresponding to Vietnam's regulation QCVN 101:2016/BTTTT for battery certification are IEC61960 (2011) and IEC62133 (2012). Note: Both standards must be met simultaneously to meet QCVN's standards. 】

Materials required for MIC certification application

(1) Technical Model Specification Table

(2) Quality Declaration Management System

(3) Approval method for quality certificate control or ISO9001 certificate

(4) Structural Protection Approval Certificate

(5) Declared rated power

(6) Antenna report

(7) Test report

(8)(Block Diagram, Schematic Diagram, Bill of Material, Parts Placement, IC Data Sheets, Internal and External Photos, Product Deion, User manual, Operational/Technical Deion, Deion of Pheripherals/Accessories)

(9) Tag information

(10) Power of Attorney/Authorization Letter

The specific process for applying for MIC certification

1) The manufacturer provides product manuals, the laboratory confirms the quotation, and both parties sign a cooperation contract.

2) Application requires submission of materials: sample, product manual, circuit diagram, block diagram, operation description BOM、 Key component certificates, application forms, and other related documents.

3) After collecting all the materials, the laboratory officially launched the certification project and arranged for testing.

4) After the test is completed, a test report and certificate will be issued.

5) Normal testing cycle: 2-3 weeks.